SYNTHETIC OIL

Shell Omala S4 GX 460 Industrial Gear Oil Applications

• Wind turbines and other inaccessible installations
  Shell Omala S4 GX 460 industrial gear oil is particularly recommended for certain
  systems where extra Long Life is required, maintenance is
  infrequent or systems are inaccessible.
• Enclosed industrial gear systems
  Recommended for industrial reduction gear systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applications
  Shell Omala S4 GX ISO 460 industrial gear oil is suitable for lubrication of bearings and other components in circulating and splash-lubricated systems.
  
  For geared systems, or Other applications that employ a filtration unit finer than 5 microns, please consult your Shell Local Technical Advisor and Product Application Specialist before using Shell Omala S4 GX
  
  For highly loaded worm drives the Shell Omala “W” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Performance, Features & Benefits

• Long oil life - maintenance saving
  Shell Omala S4 GX ISO 460 gear oil is formulated using an advanced additive system in combination with specially selected synthetic base fluids to provide outstanding resistance to breakdown over long duration and/or high temperature operation. Shell Omala S4 GX ISO VG 460 gear oil can operate successfully at bulk temperatures up to 120C. Shell Omala S4 GX offers the potential to significantly extend service intervals compared to conventional industrial gear oils.
• Excellent wear and corrosion protection
  Shell Omala S4 GX ISO VG 460 is formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions. These features provide benefits over mineral oil-based products in terms of gear and bearing component life. Shell Omala S4 GX 460 gear oil also has excellent corrosion protection, even in the presence of contamination by water and solids.
• Maintaining system efficiency
  Shell Omala S4 GX 460 gear oil can help maintain or enhance the efficiency of industrial gear systems through improved low temperature performance and lower friction in comparison to mineral oil-based products. This provides better lubrication at low start-up temperatures

Specifications, Approvals & Recommendations

• David Brown S1.53.106, except ISO 1000

Approved for wind turbine gearboxes by:

• Gamsea, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel
• ISO 12925-1 Type CKD, except ISO 1000
• ANSI/AGMA 9005-E02 (EP), except ISO 1000
• US Steel 224, except ISO 1000
• DIN 51517-3 (CLP), except ISO 1000

Shell Omala S4 GX 320 Gear Oil Applications

• Wind turbines and other inaccessible installations
  Shell Omala S4 GX ISO 320 Gear Oil is particularly recommended for certain systems where extra Long Life is required, maintenance is infrequent or systems are inaccessible.
• Enclosed industrial gear systems
  Recommended for industrial reduction gear systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applications
  Shell Omala S4 GX 320 gear oil is suitable for lubrication of bearings and other components in circulating and splash- lubricated systems.
  For geared systems, or Other applications that employ a filtration unit finer than 5 microns, please consult your Shell Local Technical Advisor and Product Application Specialist before using Shell Omala S4 GX.

For highly loaded worm drives the Shell Omala “W” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Specifications, Approvals & Recommendations

• David Brown S1.53.106, except ISO 1000
• Approved for wind turbine gearboxes by: Gamsea, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel
• ORBITAL2 approved for helical and planetary gear units for wind turbines
• ISO 12925-1 Type CKD, except ISO 1000
• ANSI/AGMA 9005-E02 (EP), except ISO 1000
• US Steel 224, except ISO 1000
• DIN 51517-3 (CLP), except ISO 1000

Shell Omala S4 GX 220 Industrial Gear Oil Applications

• Wind turbines and other inaccessible installations
  Shell Omala S4 GX 220 industrial gear oil is particularly recommended for certain
  systems where extra Long Life is required, maintenance is
  infrequent or systems are inaccessible.
• Enclosed industrial gear systems
  Recommended for industrial reduction gear systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applications
  Shell Omala S4 GX 220 oil is suitable for lubrication of bearings and other components in circulating and splash-lubricated systems.
  
  For geared systems, or Other applications that employ a filtration unit finer than 5 microns, please consult your Shell Local Technical Advisor and Product Application Specialist before using Shell Omala S4 GX
  
  For highly loaded worm drives the Shell Omala “W” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Performance, Features & Benefits

• Long oil life - maintenance saving
  Shell Omala S4 GX ISO 220 gear oil is formulated using an advanced additive system in combination with specially selected synthetic base fluids to provide outstanding resistance to breakdown over long duration and/or high temperature operation. Shell Omala S4 GX can operate successfully at bulk temperatures up to 120C. Shell Omala S4 GX 220 offers the potential to significantly extend service intervals compared to conventional industrial gear oils.
• Excellent wear and corrosion protection
  Shell Omala S4 GX ISO VG 220 gear oil is formulated to have excellent load carrying capacity and micro-pitting performance providing long component life even under shock loading conditions. These features provide benefits over mineral oil-based products in terms of gear and bearing component life. Shell Omala S4 GX 220 gear oil also has excellent corrosion protection, even in the presence of contamination by water and solids.
• Maintaining system efficiency
  Shell Omala S4 GX 220 gear oil can help maintain or enhance the efficiency of industrial gear systems through improved low temperature performance and lower friction in comparison to mineral oil-based products. This provides better lubrication at low start-up temperatures

Specifications, Approvals & Recommendations

• David Brown S1.53.106, except ISO 1000

Approved for wind turbine gearboxes by:

• Gamsea, Dongfang Wind Turbines, Dalian Heavy Industries and Sinovel
• ISO 12925-1 Type CKD, except ISO 1000
• ANSI/AGMA 9005-E02 (EP), except ISO 1000
• US Steel 224, except ISO 1000
• DIN 51517-3 (CLP), except ISO 1000

• Extended life systems
  Shell Omala S4 WE  industrial gear oil is particularly recommended for certain systems where maintenance is infrequent or systems are inaccessible (eg yaw gears in wind turbine installations).
• Enclosed industrial worm gear systems
  Recommended for industrial worm gear reduction systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applications
  Shell Omala S4 WE  gear oils are suitable for lubrication of bearings and other components in circulating and splash-lubricated systems.
  Shell Omala S4 WE  gear oil is not recommended for the lubrication of components manufactured from aluminum or aluminum alloys. For highly-loaded spur and helical gears the Shell Omala “G” series oils are recommended.
  For automotive applications including hypoid gears (axles and differentials), the appropriate Shell Spirax Oil should be used.

Shell Omala S4 WE 220 Gear Oil Applications

• Extended life systems
  Shell Omala S4 WE ISO 220 industrial gear oil is particularly recommended for certain systems where maintenance is infrequent or systems are inaccessible (eg yaw gears in wind turbine installations).
• Enclosed industrial worm gear systems
  Recommended for industrial worm gear reduction systems operating under severe operating conditions, such as high load, very low or elevated temperatures and wide temperature variations.
• Other applications
  Shell Omala S4 WE ISO VG 220 gear oils are suitable for lubrication of bearings and other components in circulating and splash-lubricated systems.
  Shell Omala S4 WE 220 gear oil is not recommended for the lubrication of components manufactured from aluminum or aluminum alloys. For highly-loaded spur and helical gears the Shell Omala “G” series oils are recommended.
  For automotive applications including hypoid gears (axles and differentials), the appropriate Shell Spirax Oil should be used.

Specifications, Approvals & Recommendations

• David Brown S1.53.105 G
• Fully approved by Bonfiglioli
• ISO 12925-1 Type CKE
• ANSI/AGMA 9005-E02 (EP)